Characteristics of stainless steel protective cover

The structure of stainless steel protective cover is mainly composed of a casing (stainless steel plate, cold plate), a spring shaft, a driven shaft, tongue scraping, nylon fiber cloth (three proofings cloth) and other components, adjusting device, adjustable, single spring, double spring two options. This kind of protective belt can be divided into two installation forms: box type and bracket type.

1, stainless steel plate shield suitable for high speed movement, the machine tool rail protection is stable and no vibration noise. (speed can run normally under 80m/min condition)

2, stainless steel plate shield each side of the guard plate at the same time parallel pull, and parallel retracted, run freely.

3, stainless steel plate protective cover will not make the guard plate out of line, there is impact sound, both beautiful, and improve the service life of the guard plate.

4, stainless steel protective cover on the basis of the original sealing strip and covered with a stainless steel cover plate, to prevent the iron scrap high temperature burn rubber strip rubbed into the rail surface pull rail.

5. Stainless steel plate shield not only protects the service life of the guard plate, but also ensures the precision of the machine tool.

The stainless steel shield can be used to protect the light bar, screw rod, column, mandrel and other circular rotating columns. It can be used horizontally or vertically.